2.
“Bucket Level Position Selection” screen is switched.
Select “Bucket Level Position Initialization”, press ENTER
switch (4), and then the initialization starts.
You can perform the following operations with switches (1)
to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
(2) DOWN switch
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
(3) RETURN switch
The screen returns to “Bucket Level Position Selection” screen.
(4) ENTER switch
The screen changes to “Bucket Level Position Initialization” confirmation screen, and then the initialization
starts.
3.
On “Bucket Level Position Initialization” confirmation
screen, press ENTER switch (4).
The level position of the selected type of bucket becomes
the default value, and the screen returns to “Bucket Level
Position Selection” screen.
REMARK
When the initialization is not necessary, press RETURN
switch (3).
AUTO KICK DOWN SETTING
When the shift mode is set to the digging mode automatically, auto-kickdown shifts the gear speed to 1st auto-
matically and eliminates operator's operation.
1.
Select “Auto Kick Down Setting” on “Machine Setting and
Information” menu screen, then press ENTER switch (4).
EXPLANATION OF COMPONENTS OPERATION
3-76
To Next Page
Loading...
Need help?
General
