2.
“Auto Kick Down Setting” screen is displayed.
Select “ON” or “OFF”, then press ENTER switch (4).
“ON”
The auto-kickdown actuates.
“OFF”
The auto-kickdown does not actuate.
It is possible to perform the following operations with
switches (1) to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
(2) DOWN switch
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
(3) RETURN switch
Cancels the selected item and returns the screen to “Machine Setting and Information” menu screen.
(4) ENTER switch
Allocates the selected item, and returns the screen to “Machine Setting and Information” menu screen.
AUTO-DECELERATION SETTING
When the auto-deceleration function is actuated, it automatically makes the low idle engine speed during no op-
eration to 800 rpm in order to reduce fuel consumption.
With the auto-deceleration function, if the work equipment, accelerator pedal, and RPM set switch are not oper-
ated for 10 seconds while the transmission is in NEUTRAL, the engine speed automatically drops to 800 rpm.
If the transmission is set to other position than NEUTRAL, or if the work equipment, accelerator pedal, and RPM
set switch are operated, the auto-deceleration function is canceled.
1.
Select “Auto-deceleration Setting” on “Machine Setting and
Information” menu screen, then press ENTER switch (4).
OPERATION EXPLANATION OF COMPONENTS
3-77
To Next Page
Loading...
Need help?
General
