3
Before making copies
3-16 bizhub 160/161
3.7 Useful functions
Panel resetting
Press the [Panel reset] key to return all modes and functions (zoom ratio,
number of copies, etc.) to their defaults. All selected settings are canceled.
The [Panel reset] key comes in handy for canceling all selected settings at
one time.
To avoid accidentally using settings from the previous copy job, press the
[Panel reset] key to return all functions and settings to their defaults before
specifying any settings for your current job.
Auto panel reset
Even if the [Panel reset] key is not pressed, the machine automatically resets
all functions and settings to their defaults 1 min after a copy cycle has been
completed or a key operation is performed.
The length of time before the machine automatically resets itself can be set
between 1 min and 5 min in addition to 30 seconds. The auto panel reset
function can even be disabled.
!
Detail
For details, refer to “Specifying AUTO PANEL RESET” on page 5-6.
To Next Page
Loading...
Need help?
General
