3
Before making copies
3-28 bizhub 160/161
Positioning a sheet original
Use the following procedure to position plain paper or an original that is not
suitable for use in the automatic document feeder.
1 Raise the automatic document feed-
er or original cover.
2 Place the original face down on the
original glass.
3 Position the original on the original
glass so that the corner of the origi-
nal aligns with the arrow in the up-
per-left corner of the original scales.
4 Gently lower the automatic docu-
ment feeder or original cover.
5 Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
6 Press the [Start] key.
This will start the copy cycle.
To Next Page
Loading...
Need help?
General
