7
Using the Utility Mode
7-6 Di152/Di183
*1: Di183 Only
Mixed Orig.
Select whether to enable Mixed Orig. as the default setting.
l The default value is “Mixed Orig. disabled.”
Paper Priority
Select a paper size or paper source that will be selected automatically when Auto
Size is selected.
l The default value is “A4C.”
Copy Priority
Choose the default mode to be selected automatically when power is turned ON
or panel reset, from among “Auto Paper,” “Auto Size,” or “Manual.”
l The default value is “Auto Paper.”
Density Priority
Choose the image density mode to be selected automatically when power is
turned ON or panel reset, from among “Auto,” “Manual,” or “Photo Manual.”
l The default value is “Auto.”
Exposure Level Priority (Auto)
Choose the exposure level to be selected automatically when power is turned ON
or panel reset, from among “Lighter,” “Normal,” or “Darker.”
l The default value is “Normal.”
32 Special Paper Setting
(5thTray) *1
0 Auto Paper enabled
(Special Paper Setting OFF)
2
1 Auto Paper disabled, Auto Tray
Switching enabled
2 Auto Paper disabled, Auto Tray
Switching disabled
33 Special Paper Setting
(Multiple Bypass Tray)
0 Auto Paper enabled
(Special Paper Setting OFF)
2
1 Auto Paper disabled, Auto Tray
Switching enabled
2 Auto Paper disabled, Auto Tray
Switching disabled
Code Name Setting Setting Details
Default
Value
Chapter07.fm Page 6 Wednesday, August 8, 2001 1:47 PM
To Next Page
Loading...
Need help?
General
