Loading Originals
4
Di152/Di183 4-7
How to position a sheet original
Use the following procedure to position plain paper or an original
that is not suitable for use in the Automatic Document Feeder.
1 Raise the Automatic Document Feeder or Original Cover.
2 Place the original face down on the
Original Glass.
3 Position the original in the left rear
corner aligned with the marker on
the scale.
4 Gently lower the Automatic Document Feeder or Original Cover.
5 Make the necessary settings.
❍ Making Copies (p.5-1)
❍ Advanced Copying (p.6-1)
6 Press the [Start] key to start the copy cycle.
Di152_183.book Page 7 Wednesday, August 8, 2001 10:57 AM