8
Error Displays and Other Indicators
8-4 Di152/Di183
8.2 When the Add Paper Indicator Lights up
If paper runs outduring a copy cycle, the Add Paper indicator lights up and
the copy cycle is stopped.
Identify the specific tray that has run out of paper on the control panel.
Then, following the procedure given in “Adding Paper” below, add paper
as necessary.
Adding Paper
<1st Tray>
1 Slide out the 1st Tray.
?
Do you know the special
precautions to be used whenthe
tray has been slid out?
➜ Be careful not to touch the
surface of the Paper Take-Up
Roll.
2 Press down on the Paper Lifting
Plate until it clicks into the locked
position.
Paper Take-Up Roll
Paper Lifting Plate
Di152_183.book Page 4 Wednesday, August 8, 2001 10:57 AM