7
Using the Utility Mode
7-28 Di152/Di183
7.6 Checking the Total Number of Copies/Prints Produced
The [Meter Count] key on the control panel allows you to check the total number
of copies or printed pages produced since the installation of the copier.
It provides the following information.
l Total Counter:
Shows the total number of copies or printed pages produced since the
installation of the copier.
l Size Counter:
Shows the number of copies or printed pages produced on paper of a preset
size. (The size will be set by your Tech. Rep.)
Using the [Meter Count] Key
1 Press the [Meter Count] Key.
2 Make sure that “tc” appears on the
Display.
The Total Counter value is then
displayed.
E.g.: The Display looks like the one
shown on the right when the value is
1,234.
Chapter07.fm Page 28 Wednesday, August 8, 2001 1:47 PM
To Next Page
Loading...
Need help?
General
