7
Using the Utility Mode
7-16 Di152/Di183
7.5 Administrator Mode
Administrator Mode
The Administrator Mode is for the administrator of your copier. When
Administrator Mode is selected, it is then necessary to enter the administrator
number.
The Administrator Mode offers two functions to be set: “Copy Track” and
“Disable Auto Shut OFF.” Study the table given below and make the appropriate
setting according to operating needs.
.
Note
The administrator number is to be programmed by your Tech. Rep. Ask him/
her for more details.
The administrator of this copier must remember the administrator number.
Settings for the Administrator Mode
1 Call the Utility Mode to the Display.
m Calling the Utility Mode to the Display (p.7-1)
2 Making sure that “U--” appears on the
Display, enter “5” from the 10-Key
Pad.
3 Press the [Start] key.
Code Name Setting Setting Details
Default
Value
1 Copy Track - Set the six different functions from
A-1 to A-6 (p.7-18)
-
2 Disable Auto Shut OFF 0 Authorized
1 Not authorized 2
Chapter07.fm Page 16 Wednesday, August 8, 2001 1:47 PM
To Next Page
Loading...
Need help?
General
