Before Making Copies
3
Di152/Di183 3-19
Interrupting Copy Jobs
During a long continuous copy or print cycle, the copier may be needed to
quickly run a different job. To interrupt a current job, press the [Interrupt]
key.
Press the [Interrupt] key a second time to return to the stopped job.
✎
Note
Depending on the specific settings made, the current job may reject
the Interrupt mode. Also, some functions are not available for the
Interrupt mode. For more details, refer to the “Function Combination
Table”(p.10-6).
Auto Tray Switching
If the current tray runs out of paper during a copy cycle and there is
another tray loaded with paper of the same size and in the same direction,
the copier will automatically select that tray to continue copying.
Di152_183.book Page 19 Wednesday, August 8, 2001 10:57 AM
To Next Page
Loading...
Need help?
General
