22 GETTING UP AND RUNNING
SETTING THE DATE AND TIME
When images are recorded, the image data is saved with the date and time of recording.
After initially inserting a memory card and charging the battery, the following message will
be displayed in the LCD monitor to prompt the date and time setup.
Use the left and right keys to select “Yes,” “No” cancels the message.
Press the central button to display the
date/ time setting screen.
Date/Time setting screen
Use the up and down keys to adjust the item.
00 : 00
Date/Time set
Set date and time.
Yes
No
Use the left and right keys to select the item to
be changed.
Press the central button to set the clock and
calendar.
To set the camera’s clock and calendar at another time, use the following procedure.
Turn the camera on by pressing the main switch near the shutter-release button.
Press the menu button to open the menu; the appearance of the menu depends on the
position of the mode dial.
2003 . 01 . 01
To Next Page
Loading...
Need help?
General
