99
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Details on using
and installing the DiMAGE Viewer software are found in the supplied software manual.
The DiMAGE manuals do not cover the basic operation of computers or their operating
systems; please refer to the manual supplied with your computer.
For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
SYSTEM REQUIREMENTS
Check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com/
Users with Windows
®
98 or 98 Second Edition will need to install the driver software on
the included DiMAGE Viewer CD-ROM (p. 102). No special driver software is required
for other Windows
®
or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows
®
98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE Xg with a computer. The new software will have no affect
on the performance of older DiMAGE cameras.
IBM PC/AT Compatible Macintosh
Windows
®
98, 98SE, Me,
2000 Professional, and
XP (Home/Professional)
Mac OS 9.0 - 9.2.2,
Mac OS X v.10.1.3 - 10.1.5,
v.10.2.1 - 10.2.8, and
v.10.3 - 10.3.1
To Next Page
Loading...
Need help?
General
