60 RECORDING - ADVANCED OPERATION
INSTANT PLAYBACK
After a still image is captured, it can
be displayed on the monitor for two
seconds before being saved. Instant
playback shows the last frame in the
series when used with the
continuous-advance drive mode (p.
45). When the LCD monitor is turned
off (p. 34), it will automatically activate
for the instant playback period.
Instant playback can be activated in
section 3 of the recording-mode menu
(p. 42). When used with voice memo,
the audio recording will begin after
the image is played back.
Images can be previewed immediately after they have been captured regardless if
instant playback is active or not. Simply continue to hold down the shutter-release
button after taking the picture to display the image on the monitor. Release the shut-
ter button to end the playback. This function is disabled if the monitor is turned off or
the continuous advance or the self-timer drive mode is used.
Camera notes
To Next Page
Loading...
Need help?
General
