28 RECORDING - BASIC OPERATION
Press the shutter-release button all the way down to
take the picture.
• After the shutter releases, the indicator lamp next to the
viewfinder will turn orange and blink indicating image data is
being written to the memory card.
Never remove a memory
Never remove a memory
card while data is being transferred
card while data is being transferred.
• The image can be previewed after it is captured by continuing
to hold down the shutter-release button. This function is
disabled if the monitor is off. Instant playback also can be used
(p. 60).
Automatic Digital Subject Program Selection
Automatic Digital Subject Program Selection chooses between program AE
and one of four digital subject programs. The digital subject programs
optimize camera setting for various conditions and subjects. Automatic
Digital Subject Program Selection is only available in the digital-subject-
program mode. For information on individual subject programs, see page
35.
To Next Page
Loading...
Need help?
General
