12 SUSPENSION SETTING 111
12.1 Fork/shock absorber
The semi-active suspension WP Semi‑active Suspension can be used to tune the suspension individually without the use of tools.
The electronic suspension setting WP Semi‑active Suspension constantly regulates the damping behavior of the suspension taking into
account various sensor data.
As a result, the electronic damping valves are matched to the current driving situation and terrain characteristics as well as the settings
made by the rider in the "Load" and "Damping" menu.
Always adapt the suspension to your riding style and the payload.
In the "Load" menu, the suspension can be set to the payload.
In the "Damping" menu, the damping behavior of the suspension can be set.
12.2 "Load"
401833-01
Tunings for different vehicle loading states can be selected in the "Load" menu. A selection
can be made between one-person operation, one-person operation with luggage, two-person
operation, and two-person operation with luggage.
The load mode selected last is displayed on the right in the segment display.
Info
For the setting to be accepted by the motorcycle, the motorcycle must be stationary
and the engine must be running.
The symbol of the last load status flashes until the new setting is adopted.
To Next Page
Loading...
Need help?
General
