KTM 1290 Super Adventure User Manual

6 CONTROLS 34
6.4.2 Light switch
M00812-10
The light switch

is fitted on the combination switch on the left.
Possible states
Low beam on – Light switch in position

. In this position, the low beam
and tail light are switched on.
High beam on – Push the light switch to position

. In this position, the
high beam and the tail light are switched on.
Headlight flasher. – Push the light switch into position

.
6.4.3 Hazard warning flasher switch
M00813-10
The hazard warning flasher switch

is fitted on the combination switch on the left.
The hazard warning flasher is used to indicate emergency situations.
Info
The hazard warning flasher can be activated or deactivated while the ignition is
switched on or up to 60 seconds after the ignition is switched off.
Only keep the hazard warning flasher activated as long as necessary as it depletes
the battery.
Possible states
Hazard warning flasher on – All four turn signals and the green turn signal
indicator lights in the combination instrument flash.

KTM 1290 Super Adventure Specifications

General

Displacement	1301 cc
Transmission	6-speed
Power	160 hp (118 kW)
Torque	138 Nm
Fuel Capacity	23 liters
Front Suspension	WP Semi-active Suspension
Rear Suspension	WP Semi-active Suspension
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	267 mm disc, 2-piston caliper
ABS	Yes
Traction Control	Yes, MTC (Motorcycle Traction Control)
Wheelbase	1, 560 mm