To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why does my KTM 1290 Super Adventure engine turn only if the clutch lever is drawn?
If your KTM Motorcycle engine only turns when the clutch lever is drawn, it could be because the vehicle is in gear (shift the transmission to idle) or due to a faulty safety start system (read out the fault memory using the KTM diagnostics tool).
What to do if my KTM 1290 Super Adventure engine turns but does not start?
General| Displacement | 1301 cc |
|---|---|
| Transmission | 6-speed |
| Power | 160 hp (118 kW) |
| Torque | 138 Nm |
| Fuel Capacity | 23 liters |
| Front Suspension | WP Semi-active Suspension |
| Rear Suspension | WP Semi-active Suspension |
| Front Brakes | Dual 320 mm discs, 4-piston calipers |
| Rear Brakes | 267 mm disc, 2-piston caliper |
| ABS | Yes |
| Traction Control | Yes, MTC (Motorcycle Traction Control) |
| Wheelbase | 1, 560 mm |
Specifies the intended operational use and limitations of the motorcycle.
General instructions and importance of following safety guidelines.
Explains symbols indicating danger, warning, caution, and note levels.
Guidance on safe riding practices, including alcohol and impairment warnings.
Emphasizes the necessity of wearing appropriate protective clothing.
Overview of switches located on the left handlebar.
Overview of switches located on the right handlebar.
Operation and function of the emergency engine OFF switch.
Operation of the ignition lock and steering lock mechanism.
Explanation of the electronic immobilizer security system.
Location and operation of the motorcycle's shift lever.
Location and operation of the rear brake foot lever.
Details the function and control of the central matrix display.
Explains the meaning of various warning and status indicator lamps.
Describes messages appearing on the matrix display for warnings.
Allows adjustment of units, language, and other system settings.
Displays warning messages and alerts detected by the system.
Crucial safety and operational advice before the first ride.
Guidelines and recommended procedures for the engine break-in period.
Safety precautions and weight limits for loading luggage and passengers.
Essential pre-ride checks to ensure roadworthiness and safety.
Step-by-step guide for starting the motorcycle's engine.
Procedure for safely moving off from a standstill.
Instructions on proper brake application and system checks.
Procedures for safely stopping and parking the motorcycle.
Instructions and safety warnings for refueling the fuel tank.
Schedule of mandatory maintenance tasks at specified intervals.
Schedule of recommended maintenance for optimal performance.
Procedure for lifting the motorcycle using the center stand.
Procedure for safely lowering the motorcycle from the center stand.
Procedure to check the drive chain for dirt accumulation.
Step-by-step guide for cleaning the motorcycle's drive chain.
Method for checking the drive chain tension.
Steps to adjust the drive chain tension correctly.
Inspection of the drive chain and sprockets for wear.
Explanation of the Anti-lock Braking System operation and modes.
Steps to check and correct the front brake fluid level.
Procedure for checking front brake pad wear.
Steps to check and correct the rear brake fluid level.
Procedure for checking rear brake pad wear.
Inspection of tires for wear, damage, cuts, and tread depth.
Procedure for checking and setting tire air pressure.
Guidelines and precautions for charging the motorcycle battery.
Procedure for safely replacing the main fuse.
Procedure for replacing individual fuses in the fuse box.
Procedure for programming and managing ignition keys.
Procedure to check the coolant level in the expansion tank.
Steps to add coolant and bleed the cooling system.
Explanation of the Motorcycle Traction Control system and its function.
Procedure to check the engine oil level using the viewer.
Steps for performing an engine oil and filter change.
Procedure for adding engine oil to the correct level.
Diagnoses and solutions for a blank instrument display.
Diagnoses and solutions for starting issues.
Diagnoses and solutions when engine turns only with clutch engaged.
Diagnoses and solutions when engine turns with gear engaged.
Diagnoses and solutions for engine starting problems.
Diagnoses and solutions for the engine stopping during a ride.
Diagnoses and solutions for the engine warning lamp.
Diagnoses and solutions for ABS warning lamp activation.
Diagnoses and solutions for excessive engine oil consumption.
Diagnoses and solutions for battery discharge issues.
Torque specifications for various engine components.
Torque specifications for various chassis components.
Specifications for SAE 10W/50 engine oil.
Specifications for SAE 5W/40 engine oil.
Symbols indicating an error condition requiring immediate intervention.
Symbols indicating errors requiring prompt intervention or active driving aids.
