KTM 1290 Super Adventure User Manual

6 CONTROLS 38
6.5.3 Switch for the cruise control system
M00811-14
The switch

for the cruise control system is fitted on the right side of the combination
switch.
Possible states
• Cruise control system switch in the home position. – In this position, the cruise con-
trol system function is switched off.
• Cruise control system switch in the pressed position. – In this position, the cruise
control system function is switched on. The cruise control system indicator lamp
lights up in the combination instrument.
Info
After activation of the cruise control system function, the throttle grip can be turned
back to the home position. The selected speed will be maintained.
To turn off the cruise control system function press the cruise control system switch
again.
In addition, the cruise control system function is immediately deactivated when one of the
following events occurs:
– Operating the hand brake lever
– Operating the foot brake lever
– Operating the clutch lever
– Shifting gears
– Turning the throttle grip beyond the home position
– Control of the motorcycle traction control (MTC)
– Also functions with deactivated motorcycle traction control (MTC) – if the front wheel
speed does not agree with the engine speed (slip at the rear wheel of lifting front wheel)

KTM 1290 Super Adventure Specifications

General

Displacement	1301 cc
Transmission	6-speed
Power	160 hp (118 kW)
Torque	138 Nm
Fuel Capacity	23 liters
Front Suspension	WP Semi-active Suspension
Rear Suspension	WP Semi-active Suspension
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	267 mm disc, 2-piston caliper
ABS	Yes
Traction Control	Yes, MTC (Motorcycle Traction Control)
Wheelbase	1, 560 mm