KTM 1290 Super Adventure User Manual

23 TECHNICAL DATA 230
23.1 Engine
Design 2-cylinder 4-stroke Otto engine, 75° V arrangement, water-cooled
Displacement 1,301 cm³ (79.39 cu in)
Stroke 71 mm (2.8 in)
Bore 108 mm (4.25 in)
Compression ratio 13.1:1
Idle speed 1,300… 1,500 rpm
Control DOHC, 4 valves per cylinder, chain-driven
Valve - valve plate diameter
Intake 42 mm (1.65 in)
Exhaust 34 mm (1.34 in)
Valve clearance
Exhaust at: 20 °C (68 °F) 0.25… 0.30 mm (0.0098… 0.0118 in)
Intake at: 20 °C (68 °F) 0.10… 0.15 mm (0.0039… 0.0059 in)
Crankshaft bearing Sleeve bearing
Conrod bearing Sleeve bearing
Piston Forged light alloy
Piston ring 1 upper compression (rectangular) ring, 1 lower compression ring,
1 oil scraper ring
Engine lubrication Pressure circulation lubrication with three rotary pumps
Primary transmission 40:76
Clutch Antihopping clutch in oil bath/hydraulically operated
Transmission 6-speed claw gears
Transmission ratio

KTM 1290 Super Adventure Specifications

General

Displacement	1301 cc
Transmission	6-speed
Power	160 hp (118 kW)
Torque	138 Nm
Fuel Capacity	23 liters
Front Suspension	WP Semi-active Suspension
Rear Suspension	WP Semi-active Suspension
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	267 mm disc, 2-piston caliper
ABS	Yes
Traction Control	Yes, MTC (Motorcycle Traction Control)
Wheelbase	1, 560 mm