KTM 1290 Super Adventure User Manual

7 COMBINATION INSTRUMENT 72
7.9.20 "Clock/Date"
401990-01
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Clock/Date" is highlighted in black on the matrix dis-
play. Pressing the SET button again opens the menu.
– Use the UP or DOWN button to navigate through the menu. Use the SET button to set
the time and date.
If the battery was removed, the time and date must be set in the matrix display.
7.9.21 "Shift Light"
L01433-10
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Shift Light" is highlighted in black on the matrix dis-
play. Pressing the SET button again opens the menu.
– Press the UP or DOWN button to select the function. Use the SET button to set the
engine speed for the shift warning light.
When the engine speed reaches "RPM 1", the shift warning light flashes.
When the engine speed reaches "RPM 2", the shift warning light lights up continuously.
Switch the "Shift Light" function on or off.

KTM 1290 Super Adventure Specifications

General

Displacement	1301 cc
Transmission	6-speed
Power	160 hp (118 kW)
Torque	138 Nm
Fuel Capacity	23 liters
Front Suspension	WP Semi-active Suspension
Rear Suspension	WP Semi-active Suspension
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	267 mm disc, 2-piston caliper
ABS	Yes
Traction Control	Yes, MTC (Motorcycle Traction Control)
Wheelbase	1, 560 mm