KTM 1290 Super Duke R 2018 User Manual

PREPARING FOR USE 9
115
– Run the engine in.
9.2 Running in the engine
– During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi) 6,500 rpm
After the first: 1,000 km (620 mi) 10,250 rpm
– Avoid fully opening the throttle!
9.3 Loading the vehicle
Warning
Danger of accidents Total weight and axle loads influence the handling characteristic.
The overall weight consists of: motorcycle ready for operation and with a full tank, driver and passenger
with protective clothing and helmet, and luggage.
– Do not exceed the maximum permissible overall weight or the axle loads.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm