KTM 1290 Super Duke R 2018 User Manual

23 TECHNICAL DATA
276
23.1 Engine
Design 2-cylinder 4-stroke Otto engine, 75° V arrangement,
water-cooled
Displacement 1,301 cm³ (79.39 cu in)
Stroke 71 mm (2.8 in)
Bore 108 mm (4.25 in)
Compression ratio 13.6:1
Idle speed 1,400 … 1,600 rpm
Control DOHC, 4 valves per cylinder, chain-driven
Valve - valve plate diameter
Intake 42 mm (1.65 in)
Exhaust 34 mm (1.34 in)
Valve clearance
Exhaust at: 20 °C (68 °F) 0.25 … 0.30 mm (0.0098 … 0.0118 in)
Intake at: 20 °C (68 °F) 0.10 … 0.15 mm (0.0039 … 0.0059 in)
Crankshaft bearing Sleeve bearing
Conrod bearing Sleeve bearing
Piston Forged light alloy
Piston ring 1 upper compression (rectangular) ring, 1 lower com-
pression ring, 1 oil scraper ring
Engine lubrication Dry sump lubrication system with three rotor pumps

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm