KTM 1290 Super Duke R 2018 User Manual

6 CONTROLS
34
6.7 Turn signal switch
S01716-10
Turn signal switch
1
is fitted on the combination switch on the
left.
Possible states
Turn signal off – Turn signal switch pushed toward the
switch housing.
Left turn signal, on – Turn signal switch pressed to
the left. The turn signal switch returns automatically
to the central position after use.
Right turn signal, on – Turn signal switch pressed to
the right. The turn signal switch returns automatically
to the central position after use.
Info
An automatic turn signal switch-off function (ATIR) is avail-
able as a software feature.
The ATIR function uses a time and distance counter.
If the turn signal has been on for at least 10 seconds and
150 meters of riding distance, the turn signal is switched
off.
If the vehicle is stationary, both counters are stopped.
If the turn signal switch is reactivated, both counters are
reset.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm