KTM 1290 Super Duke R 2018 User Manual

15 WHEELS, TIRES
200
15.1 Removing the front wheel
Preparatory work
– Lift the motorcycle with the rear lifting gear. ( p. 157)
– Lift the motorcycle with the front lifting gear. ( p. 158)
R01777-10
Main work
–
Remove screws
1
from both brake calipers.
– Press back the brake linings with a light lateral tilting of the
brake calipers on the brake disc. Pull the brake calipers care-
fully back from the brake discs and hang them to one side.
Info
Do not pull the hand brake lever when the brake caliper
has been removed.
R01778-10
–
Loosen screws
2
and
3
.
–
Unscrew screw
2
about six turns and press your hand on the
screw to push the wheel spindle out of the axle clamp. Remove
screw
2
.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm