KTM 1290 Super Duke R 2018 User Manual

SERVICE SCHEDULE 11
143
11.3 Recommended work
Every four years
Every year
every 30,000 km (18,600 mi)
every 15,000 km (9,300 mi)
after 1,000 km (620 mi)
Check the frame. ●
Check the swingarm. ●
Check/clean the oil nozzle for clutch lubrication. ○ ● ●
Check the swingarm bearing. ● ●
Check the wheel bearings. ● ●
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth
operation.
○ ● ● ● ●
Empty the drainage hoses. ○ ● ● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking,
leaks, and incorrect routing.
● ● ● ●
Check the antifreeze. ○ ● ● ●
Check the screws and nuts for tightness. ○ ● ● ● ●
Change the coolant. ●
○ One-time interval
● Periodic interval

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm