KTM 1290 Super Duke R 2018 User Manual

RIDING INSTRUCTIONS 10
123
10.5 Starting off with launch control (optional)
Warning
Danger of accidents Launch control enables very powerful acceleration which may ask too much of a
novice rider.
– Only use the launch control if you have the appropriate experience.
– Do not use launch control on public roads.
H02000-01
Condition
The drive mode TRACK (optional) is activated.
First gear is engaged.
TC indicator lamp does not light up.
Coolant temperature: > 60 °C (> 140 °F)
Total riding distance covered: > 1,000 km (> 620 mi)
– Activate launch control in the combination instrument.
The TC indicator lamp flashes quickly.
– Apply full throttle with the clutch lever pulled.
The engine speed is adjusted.
6,500 rpm
– Release the clutch lever quickly but in a controlled man-
ner.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm