KTM 1290 Super Duke R 2018 User Manual

COMBINATION INSTRUMENT 7
83
Info
In drive mode TRACK (optional), the UP button can be used
to set the slip adjustment.
7.14.17 Quick Selector 2
K00770-01
Condition
• The motorcycle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the Settings menu is marked
on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until the Quick Selector menu is
marked on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until the Quick Selector 2 menu
is marked on the display. Press the SET button to open the
menu.
– Press the UP or DOWN button until the desired menu is
marked.
– Press the SET button to confirm the selection.
A menu can be defined for direct selection in the Quick Selector 2
menu.
When the menu is closed, the menu defined in Quick Selector 2 is
opened by pressing the DOWN button.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm