KTM 1290 Super Duke R 2018 User Manual

SERVICE WORK ON THE CHASSIS 13
165
13.8 Removing the passenger seat
E00693-10
– Insert the Race‑on key or the black ignition key into the seat
lock
1
and turn clockwise.
– Lift the passenger seat at the front and pull it out of the
bracket toward the front.
– Take off the passenger seat.
– Remove the key.
13.9 Mounting the passenger seat
401922-10
–
Attach the recesses of the passenger seat in guides
1
and
lower the front of the seat while pushing it back.
–
Position locking pin
2
in the lock housing and push the pas-
senger seat down at the front.
The locking pin engages with an audible click.
– Check that the passenger seat is correctly mounted.

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm