KTM 1290 Super Duke R 2018 User Manual

SERVICE WORK ON THE CHASSIS 13
177
Info
Turn clockwise to increase the chain tension; turn
counterclockwise to reduce the chain tension.
The tool required is in the tool set.
– Check the chain tension. ( p. 174)
The chain tension matches the specified value.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
–
Tighten screw
1
.
Guideline
Screw, eccentric M16 70 Nm (51.6 lbf ft)
– Remove the rear of the motorcycle from the lifting gear.
( p. 157)
13.19 Checking the chain, rear sprocket, engine sprocket and chain guide
Preparatory work
– Lift the motorcycle with the rear lifting gear. ( p. 157)

KTM 1290 Super Duke R 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Traction Control	MTC (Motorcycle Traction Control)
Ground Clearance	140 mm
Seat Height	835 mm
Fuel Capacity	18 liters
Dry Weight	189 kg
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Power	177 hp (130 kW) @ 9, 750 rpm
Torque	141 Nm @ 7, 000 rpm
Fuel System	Electronic fuel injection
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo, 320 mm
Rear Brake	Brembo twin-piston fixed caliper, 240 mm
Wheelbase	1482 mm