KTM 250 SX-F EU 2010 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 47
Guideline
Rebound damping
Comfort 24 clicks
Standard 20 clicks
Sport 20 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
100020-10
(SX‑F)
– Remove protection covers .
– Turn adjusting screws  clockwise all the way.
Guideline
(SX‑F EU)
Rebound damping
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
(SX‑F USA)
Rebound damping
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Adjusting screws  are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
– Turn back counterclockwise by the number of clicks corresponding to the fork
type.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
– Mount protection covers .
13.18Adjusting the spring preload of the fork (EXC‑F, EXC‑F SIX DAYS, XCF-W)
600671-01
– Turn the adjusting screws counterclockwise all the way.
Info
Make the same adjustment on both fork legs.
– Turn back clockwise by the number of turns corresponding to the fork type.
Guideline
Spring preload - Preload Adjuster
Comfort 0 turn
Standard 2 turns
Sport 4 turns
Info
Turn clockwise to increase spring preload; turn counterclockwise to reduce
spring preload.
Adjusting the spring preload has no influence on the absorption setting of
the rebound damping.
Basically, however, you should set the rebound damping higher with a
higher spring preload.

KTM 250 SX-F EU 2010 Specifications

General

Brand	KTM
Model	250 SX-F EU 2010
Category	Motorcycle
Language	English