EasyManuals Logo

KTM 500 XCF-W 2020 User Manual

KTM 500 XCF-W 2020
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
SERVICE SCHEDULE 10
49
10.1 Additional information
Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-date
service schedule can always be found on KTM Dealer.net. Your authorized KTM dealer will be happy to advise
you.
10.2 Required work
Every 10 operating hours when used for motorsports
Every 45 operating hours
Every 30 operating hours
Every 15 operating hours
After 1 operating hour
Read out the fault memory using the KTM diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the 12-V battery.
Check the front brake linings. ( p. 104)
Check the rear brake linings. ( p. 111)
Check the brake discs. ( p. 101)
Check the brake lines for damage and leakage.
Check the rear brake fluid level. ( p. 110)
Check the free travel of the foot brake lever. ( p. 108)
Check the frame. ( p. 94)
Check the link fork. ( p. 94)
Check the fork bearing for play.
Check the heim joint for play.
Check the tire condition. ( p. 119)
Check tire pressure. ( p. 119)
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. ( p. 120)
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 92)
Check the chain tension. ( p. 90)
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth
operation.
Check/correct the fluid level of the hydraulic clutch. ( p. 96)
Check front brake fluid level. ( p. 102)
Check the free travel of the hand brake lever. ( p. 100)
Check steering head bearing play. ( p. 73)
Check the valve clearance.
Check the clutch.
Change the engine oil and oil filter, clean the oil screens. ( p. 144)
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking,
leaks, and incorrect routing.

Table of Contents

Other manuals for KTM 500 XCF-W 2020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 500 XCF-W 2020 and is the answer not in the manual?

KTM 500 XCF-W 2020 Specifications

General IconGeneral
BrandKTM
Model500 XCF-W 2020
CategoryMotorcycle
LanguageEnglish

Related product manuals