EasyManuals Logo

KTM 500 XCF-W 2020 User Manual

KTM 500 XCF-W 2020
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
SERVICE WORK ON THE CHASSIS 12
89
V01762-11
Plug in connector
3
for the fuel pump.
Remove the wash cap set.
Thoroughly clean the plug-in connection of the fuel line using
compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
Lubricate the O-ring and connect plug-in connection
4
for
the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
Mount the seat. ( p. 79)
12.35 Checking for chain dirt accumulation
400678-01
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
Clean the chain. ( p. 89)
12.36 Cleaning the chain
Warning
Danger of accidentsLubricants on the tires reduces the road grip.
Remove lubricants from the tires using a suitable cleaning agent.
Warning
Danger of accidentsOil or grease on the brake discs reduces the braking effect.
Always keep the brake discs free of oil and grease.
Clean the brake discs with brake cleaner when necessary.
Note
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
The service life of the chain depends largely on its maintenance.

Table of Contents

Other manuals for KTM 500 XCF-W 2020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 500 XCF-W 2020 and is the answer not in the manual?

KTM 500 XCF-W 2020 Specifications

General IconGeneral
BrandKTM
Model500 XCF-W 2020
CategoryMotorcycle
LanguageEnglish

Related product manuals