ELECTRICAL SYSTEM 120
13.5Changing the fuses of individual power consumers
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
– Switch off all power consumers and the engine.
– Remove the seat. ( p. 81)
101144-10
– Open fuse box cover .
– Check the fuses.
Info
A defective fuse can be identified by the burned-out fuse wire .
Spare fuses are also found in the storage compartment.
– Remove the faulty fuse.
To Next Page
Loading...
Need help?
General
