SERVICE WORK ON THE ENGINE 161
16.4Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
101169-10
– The oil must be added in two steps.
Engine oil 3.80 l
(1.004 US gal)
External
temperature:
≥ 0 °C (≥ 32 °F)
Engine oil
(SAE 10W/50)
( p. 195)
External
temperature:
< 0 °C (< 32 °F)
Engine oil (SAE
5W/40) ( p. 195)
– Remove plug and add engine oil to the top marking .
– Mount the plug.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
– Start the engine and run it until it reaches operating temperature.
Six bars of the temperature display light up.
– Check the lubrication system for leaks.
– Switch off the engine.
– Park the motorcycle on a horizontal surface in a vertical position (not on the side
stand).
To Next Page
Loading...
Need help?
General
