COOLING SYSTEM 145
» If there is no coolant in the compensating tank:
–
Check the cooling system for leaks. x
Info
Do not start up the motorcycle!
–
Fill/bleed the cooling system. x ( p. 148)
– Mount cap of the compensating tank.
101157-10
– Check the coolant level in the radiator.
The radiator must be completely filled.
» If the coolant level does not meet specifications:
– Correct the coolant level and determine the reason for the coolant loss.
Alternative 1
Coolant ( p. 194)
Alternative 2
Coolant (mixed ready to use) ( p. 194)
» If more coolant needed to be added than the specified value:
> 0.50 l (> 0.53 qt.)
–
Fill/bleed the cooling system. x ( p. 148)
– Mount radiator cap .
14.3Checking the coolant level in the compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
To Next Page
Loading...
Need help?
General
