OPERATING THE TRACTOR36
BHST Response Control Dial
This dial is used to set the start-up response when you
step on the speed control pedal and the engine brake
effect when you release the pedal.
Turn the dial toward "FAST", and the response level gets
quicker. Turn it toward "SLOW" to have a slower response
level.
When you move the tractor forward and backward
repeatedly, during loader operations, for example, set the
dial toward "FAST". It helps improve the working
efficiency.
If the turf grass would be damaged by the tires at a start
and stop, set the dial toward "SLOW".
A This dial can be set whether the tractor is moving or
not.
BH-DS (Hydro Dual Speed) Lever
This lever changes the tractor speed in two stages
whether the tractor is moving or not.
Pull up the lever to increase the speed, and push it down
to decrease the speed. The selected speed can be
checked with the indicator on the meter panel.
(1) HST response control dial (A) "FAST"
(B) "SLOW"
(1) H-DS lever (A) "UP" (Hi)
(B) "DOWN" (Lo)
(C) " " (Hi)
(D) " " (Lo)
To Next Page
Loading...
Need help?
General
