119TROUBLESHOOTING
If you have any questions, contact your local KUBOTA Dealer.
POWER TRAIN TROUBLE SHOOTING
If something is wrong with the power train, the master
system warning indicator starts blinking and the error
code shown below is displayed on the liquid crystal
display, indicating the location of the trouble. If an error
code appears, immediately contact your local KUBOTA
Dealer for repairs.
Trouble Operator's action
Engine not overheated, but
engine warning indicator on.
Stop the engine and get it restarted. If the engine fails to restart or the indicator stays on,
immediately contact your local KUBOTA dealer.If the warning indicator lights up, the
following phenomena may appear depending on the engine's trouble spot.
A The engine stops unexpected.
A The engine fails to start or gets interrupted just after start.
A The engine output is not enough.
A The engine output is enough, but the warning indicator stays on.
(1) Master system warning indicator
(2) Error code
Displayed error code Trouble Remarks Operator’s action
ERROR-1 Acceleration sensor (main) trouble
Contact your
local KUBOTA
Dealer.
ERROR-2 Acceleration sensor (sub) trouble
ERROR-3 Acceleration sensor main/sub phase shifting trouble
ERROR-11 PTO relay trouble
ERROR-12 4-wheel-drive solenoid trouble
ERROR-21 Range gear shift (Hi) switch trouble
ERROR-22 Range gear shift (6th) switch trouble
ERROR-23 Shuttle rotating sensor or switch(*1) trouble *1: Range gear shift
(Hi) switch and Range
gear shift (6th) switch
ERROR-24 Machine speed sensor or switch(*1) trouble
ERROR-25 DPF regeneration malfunction trouble
ERROR-60 Analog reference supply voltage +5V trouble
ERROR-63 Acceleration & engine adjustment trouble
ERROR-99 Communication trouble
Eng NG Engine communication trouble Engine trouble, etc.
ECU NG ECU communication trouble ECU trouble, etc.
To Next Page
Loading...
Need help?
General
