Kubota M7060 User Manual

38 OPERATING THE TRACTOR
LCD MONITOR
BChanging Display Mode
1. The LCD monitor gives three different display modes: "Traveling speed and Hour meter", "Traveling speed and PTO
speed" and "Traveling speed and Fuel meter". Each time the PTO/Hour meter select switch is pressed, the mode is
switched to the changing display.
2. The PTO clutch control switch works for the following automatic display modes.
1) PTO clutch control switch ON: Traveling speed and PTO speed are displayed.
2) PTO clutch control switch OFF: Traveling speed and Hour meter are displayed.
3. The units of travel speed and mileage (mile, km, gallon and liter) can be selected with the traveling speed select switch.
(1) LCD monitor
(2) Hour Meter Indication
(3) PTO Indication
(4) PTO / Hour Meter Select Switch
(5) Traveling Speed Select Switch

Kubota M7060 Specifications

General

Engine Type	Diesel
Horsepower	71 HP
PTO Horsepower	64 HP
Cylinders	4
Hydraulic System	Open Center
3-Point Hitch	Category II
Drive	4WD
Gears	12 Forward / 12 Reverse
Lift Capacity	3307 lbs
Displacement	148.5 cu in
Height	96.5 in (245 cm)