PERIODIC SERVICE66
BCleaning Evacuator Valve
Open the evacuator valve to get rid of large particles of
dust and dirt.
BCleaning Grill, Radiator Screen, Oil Cooler
and Battery Mount
To avoid personal injury:
A Be sure to stop the engine before removing the
screen.
C Opening the panel
1. To open the panel, pull its front outward.
2. To close the panel, push it inward to get locked.
C Cleaning
1. Open the panel.
2. Raise the panel until pin(A) clears the hole, and take
out the panel.
3. Check front grill to be sure it is clean from debris.
4. Detach the radiator screen and remove all foreign
materials.
5. Check oil cooler and battery mount to be sure they are
clean from debris.
6. Attach the panel and close it.
A Grill and screen must be clean from debris to prevent
engine from overheating and to allow good air intake
for air cleaner.
(1) Evacuator valve
(1) Panel
(1) Panel
(2) Radiator screen
(3) Oil cooler
(4) Battery mount
(5) Pin (A)
(6) Pin (B)
(7) Hole