KYMCO DINK 200 User Manual

4. LUBRICATION SYSTEM
4-4
DINK 200
Circlip
Bolts
Oil Pump Driven Gear
Oil Separator
OIL PUMP REMOVAL
First drain the coolant.
Remove the right crankcase cover. (

10-3)
Remove the A.C. generator starter driven
gear. (

10-4)
Remove the attaching bolt and oil separator
cover.
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Remove the two oil separator bolts to remove
the oil pump.
OIL PUMP DISASSEMBLY
Remove the screw and disassemble the oil
pump as shown.
Oil Separator Cover
Oil Pump

KYMCO DINK 200 Specifications

General

Brand	KYMCO
Model	DINK 200
Category	Scooter
Language	English