KYMCO DINK 200 User Manual

6. CYLINDER HEAD/VALVES
6-9
DINK 200
Tap the valve stems gently with a plastic
hammer to firmly seat the cotters.
CYLINDER HEAD INSTALLATION
Install the cam chain guide.
Install the dowel pins and a new cylinder
head gasket.
Install the cylinder head and take out the cam
chain
Assemble the camshaft holder.
First install the intake and exhaust valve
rocker arms; then install the rocker arm shafts.
Gasket
Cam Chain Guide
Valve Rocker Arms
Plastic Hammer
Cam Chain
Cylinder Head
Camshaft Holder
Be careful not to damage the valves.
°Ø
Dowel Pins
• Install the exhaust valve rocker arm
shaft on the “EX” side of the camshaft
holder and the exhaust rocker arm shaft
is shorter.
• Clean the intake valve rocker arm shaft
off any grease before installation.
• Align the cutout on the exhaust valve
rocker arm shaft with the bolt of the
camshaft holder.
°Ø

KYMCO DINK 200 Specifications

General

Brand	KYMCO
Model	DINK 200
Category	Scooter
Language	English