19. EVAPORATIVE/EXHAUST EMISSION
CONTROL SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• During operation, be careful to avoid scalding caused by the exhaust muffler.
• Note the locations of tubes for proper installation.
• Replace any damaged tube with a new one.
• Make sure to tighten the connector of each tube securely
TOOLS
• Vacuum pump－A937Χ－014－ΧΧΧΧ
SPECIFICATIONS
Air injection cut-off valve actuating pressure－250mm/Hg－30 liter/min.
Reed stopper clearance－4.6mm
To Next Page
Loading...
Need help?
General
