KYMCO ZING 150 User Manual

2. INSPECTION/ADJUSTMENT
2-4
Gap, Wear, and
Fouling Deposits
AIR CLEANER
AIR CLEANER REPLACEMENT
Remove the right side cover. Remove the
two screws attaching the emission control
system.
Remove the air cleaner case cover screws
and the cover.
Remove the air cleaner screen and element.
Check the element and replace it with a new
one if it is excessively dirty or damaged.
CHANGE INTERVAL
More frequent replacement is required when
riding in unusually dusty or rainy areas.
SPARK PLUG
Remove the spark plug.
Check the spark plug for wear, damage and
fouling deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug: DR8EA
Measure the spark plug gap.
Spark Plug Gap: 0.6～0.7mm
Elemen
t
Screen
Screw
Cracks
Damage
Squeeze out
and dr
y
Washer
Deformation
Spark Plug
Wash
Engine
oil
Squeeze out
and dr
y
Dry
• If the air cleaner is installed
improperly, dust may be sucked into
the cylinder directly to reduce the
engine horse-power and affect engine
service life.
• Do not wash the element in any solvent
of high vaporability
＊
When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
＊

KYMCO ZING 150 Specifications

General

Brand	KYMCO
Model	ZING 150
Category	Motorcycle
Language	English