Lantronix xPrintServer User Manual

4: Configuration
Lantronix® xPrintServer® User Guide 46
Setting Printer Options
Use this selection to view and modify settings in a printer provisioned for the xPrintServer device.
1. Login to the xPrintServer device’s Admin interface (see Logging In.)
2. Click the Printer tab to access the Printers > List page (see Figure 4-1.)
3. Utilize Search as necessary to find a particular printer.
4. Click the button beside the printer you wish to set printer options.
5. Click Set Printer Options in the popup command menu that appears (or Cancel within the
same menu if you want to back out of it.) Available printer settings appears.
 Different printers will have different printer settings available for modification.
 Some printers will have multiple heading tabs by which all the setting options are
organized.
Figure 4-9 Sample Printer Options
6. Click through available tabbed headings (all in dark blue) and make changes as desired.
7. Click Save Changes to save. A note verifying that settings have been saved successfully
appears on the screen. Changes to printer settings will remain in place until changed through
the xPrintServer unit.
8. Click the Return to Printer List button at any time to return to the Printers > List page.
The printer options above
provides configurable settings
under six tabs: “Options Installed”,
“JCL”, “General”, “Output”,
“Advanced Options” and “Cover”.
The printer options to the right
has several more configurable
settings organized beneath each
of ten tabs.
Different printer models will have
different sets of configurable
settings organized under one or
more dark blue tab(s) as
exemplified by the options
available in these printers. Clicking
a tab brings you to the modifiable
settings organized under that tab.

Lantronix xPrintServer Specifications

General

Brand	Lantronix
Model	xPrintServer
Category	Print Server
Language	English