Lantronix xPrintServer User Manual

4: Configuration
Lantronix® xPrintServer® User Guide 48
Updating Printer IP Addresses
Use this feature to provide a list of printers outside of the same subnet the xPrintServer unit is on.
This feature allows auto-discovery of printers outside the current subnet.
1. Login to the xPrintServer device’s Admin interface (see Logging In.)
2. Click the Printers tab to access the Printers > List page (see Figure 4-1.)
3. Click the Printer Address link on the left side of the Printers page. A list of existing Printer
IP Addresses appears in the Printer IP Addresses page, if any were previously added.
4. Click into the large square field in the Printer IP Addresses page.
Figure 4-11 Printer IP Address Page
5. Update the Printer IP Addresses by adding a new printer IP address, modifying an existing IP
address or deleting an address. To add more than one printer IP address, enter one address
per line (separated by a paragraph break using the Enter key on the keyboard.)
6. Click Save to save added or modified IP address(es.)
7. Click OK in the confirmation popup.
Click inside
to edit/type
printer IP
addresses.

Lantronix xPrintServer Specifications

General

Brand	Lantronix
Model	xPrintServer
Category	Print Server
Language	English