Lantronix® xPrintServer® User Guide 70
5: Updating Firmware
Use one of two methods to update firmware through the Admin > Firmware page. Clicking one
of the two buttons allows firmware to be uploaded directly from the Lantronix Web services
website or through a USB flash drive.
Figure 5-1 Firmware Update Options
Updating Firmware via the Lantronix Web Services Website
Note: Internet access is required for firmware updates.
This chapter provides directions for updating firmware, which may be necessary from time to
time, through the xPrintServer device’s Admin interface.
1. Login to the xPrintServer user interface (see Logging In.)
2. Click the Admin tab to access the Admin menu. A list of all available configuration options
appears to the left of the screen.
3. Click the Firmware link on the left side of the page. The firmware you are currently running
displays. Click the Check for Firmware Update button to check if a firmware update is
available at this time. After a few seconds, you will receive one of two messages:
“Firmware update is available” indicating you may proceed to step 5.
“You are running the latest version of the firmware” indicating no firmware update is
necessary at this time.
Note: If the Check for Firmware Update button is disabled (unavailable), this indicates that
internet connectivity is not available.
4. Click Upgrade Firmware.
To Next Page
Need help?
General
