Lenze 8200 vector User Manual

Basic units in the power range of 15 ... 90 kW
Terminal assignment - Application I/O PT E82ZAFA...
7
Extensions for automation
7.4
7.4.5
L
7.4-13
EDS82EV903-1.0-11/2002
7.4.5 Terminal assignment - Application I/O PT E82ZAFA...
l The device is wired using an attachable terminal block for larger cable
cross-sections. The function module stands out approx. 13 mm because of
the attachable terminal block.
l The application I/O PT is wired like the application I/O.
l Please note: The application I/O PT has got one terminal 7 (GND) only.
Electrical connection Plug connector with spring connection
Possible connections
rigid: 1.5 mm
2
(AWG 16)
flexible:
without wire crimp cap
1.5 mm
2
(AWG 16)
with wire crimp cap,without plastic sleeve
1.5 mm
2
(AWG 16)
with wire crimp cap, with plastic sleeve
0.5 mm
2
(AWG 20)
Bare end 9mm
Data of the spring-clamp
terminals
Show/Hide Bookmarks

Lenze 8200 vector Specifications

General

Category	DC Drives
Series	8200 vector
Enclosure Rating	IP20
Control Method	Vector control
Communication	CANopen, DeviceNet, Profibus
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Humidity	< 95 % non-condensing
Operating Temperature	0 to +45 °C (derating above 40°C)