Name: Lenze E84DGFCp Series
Brand: Lenze
Rating: 4 (1 reviews)

To Next Page

To Previous Page

EDS84DMOTPBUS EN 3.0 - 11/2011 L 35

Communication manual 8400 motec PROFIBUS

Process data transfer

Access to process data / PDO mapping

8 Process data transfer

8.1 Access to process data / PDO mapping

Process data are transferred via the MCI/CAN interface.

 Max. 8 words (16 bits/word) per direction can be exchanged.

 The process data are accessed via the port blocks LP_Network_In and

LP_Network_Out. These port blocks are also called process data channels.

 The port/function block interconnection of the process data objects (PDO) takes place

via the Lenze »Engineer«.

[8-1] External and internal data transfer between bus system, controller, and application

 Software manual / »Engineer« online help "Inverter Drives 8400 motec"

Here you will find detailed information on port blocks and port/function block

interconnection in the »Engineer«.

Questions and Answers:

Need help?

Do you have a question about the Lenze E84DGFCp Series and is the answer not in the manual?

Lenze E84DGFCp Series Specifications

General