Lenze E84DGFCp Series User Manual

EDS84DMOTPBUS EN 3.0 - 11/2011 L 77
Communication manual 8400 motec PROFIBUS
Error messages
Short overview (A-Z) of the PROFIBUS error messages
12 Error messages
This chapter complements the error list in the software manual and the »Engineer« online
help for the Inverter Drive 8400 motec by PROFIBUS error messages.
12.1 Short overview (A-Z) of the PROFIBUS error messages
The following table contains all PROFIBUS error messages in alphabetical order with the
preset error response as well as – if applicable – the parameter for setting the error
response.
 Tip!
When you click the cross-reference in the last column, you will see a detailed
description (causes and remedies) of this error message.
 Software manual/»Engineer« online help for Inverter Drives 8400 motec
Here you can find general information on diagnostics & fault analysis and on
error messages.
Error text Error type Subject area
no.
Error no. Adjustable
in
Detailed
information
Error: Lenze settings loaded 1: Fault 444 25632 - 0x01bc6420
Internal error 1: Fault 444 24832 - 0x01bc6100
Internal error 1: Fault 444 24592 - 0x01bc6010
Internal error 1: Fault 444 24833 - 0x01bc6101
Internal error 1: Fault 444 24848 - 0x01bc6110
Restart after watchdog reset 1: Fault 444 24593 - 0x01bc6011
Profibus Watchdog: DP-V1 MSC2 elapsed 1: Fault 444 33074 C13880/2 0x01bc8132
Profibus Watchdog: Monitoring time elapsed 1: Fault 444 33072 C13880/1 0x01bc8130
Profibus: State Data_Exchange left 1: Fault 444 33073 C13880/1 0x01bc8131
Memory. No access 1: Fault 444 21809 - 0x01bc5531
Memory. Read error 1: Fault 444 21810 - 0x01bc5532
Memory. Write error 1: Fault 444 21811 0x01bc5533
Invalid parameter record 1: Fault 444 25631 0x01bc641f

Lenze E84DGFCp Series Specifications

General

Brand	Lenze
Model	E84DGFCp Series
Category	Conference System
Language	English