Lenze E84DGFCp Series User Manual

Communication manual 8400 motec PROFIBUS
Error messages
Possible causes and remedies
80 L EDS84DMOTPBUS EN 3.0 - 11/2011
Profibus Watchdog: Monitoring time elapsed [0x01bc8130]
Profibus: State Data_Exchange left [0x01bc8131]
Profibus Watchdog: DP-V1 MSC2 elapsed [0x01bc8132]
Response (Lenze setting printed in bold) Setting: C13880/1 (; adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Permanent interruption of communication to PROFIBUS
master.
• See also chapter "Permanent interruption of
PROFIBUS communication" ( 69).
Check cables and terminals.
Note:
We recommend to set "Warning locked" for the response
(no drive-relevant response).
Response (Lenze setting printed in bold) Setting: C13880/1 (; adjustable response)
: None  System fault ; Fault  Trouble ; Quick stop by trouble ; Warning locked  Warning ; Information
Cause Remedy
Data exchange via PROFIBUS has been stopped.
• See also chapter "Permanent interruption of
PROFIBUS communication" ( 69).
Check cables and terminals.
The slave must receive new parameterisation and
configuration files from the master in order to be able to
exchange data again.
Response (Lenze setting printed in bold) Setting: C13880/2 (; adjustable response)
: No response  System fault ; Fault  Trouble ; Quick stop by trouble ; Warning locked  Warning ; Information
Cause Remedy
Permanent interruption of communication to PROFIBUS
master.
• See also chapter "Permanent interruption of
PROFIBUS communication" ( 69).
Check cables and terminals.
Note:
We recommend to set "Warning locked" for the response
(no drive-relevant response).

Lenze E84DGFCp Series Specifications

General

Brand	Lenze
Model	E84DGFCp Series
Category	Conference System
Language	English